維特根 3800 CR 就地冷再生機介紹

Introduction to Wittgen 3800 CR on-site cold regeneration machine

維特根 3800 CR 冷再生機的工作寬度為 3.8 m，再生深度為 0 - 150 mm，配備 708 KW 的高性能發動機，確保了再生的性。設備不僅能夠使用常見的上切銑刨工藝，而且還能夠使用維特根研發的下切工藝進行再生施工。當裝備了輸料皮帶，采用下切銑刨工藝獲得的混合料便被輸送到行駛在后面的瀝青攤鋪機中，然后及時地進行均勻攤鋪。

The working width of the Wittgen 3800 CR cold regeneration machine is 3.8 m, and the regeneration depth is 0-150 mm. It is equipped with a high-performance engine of 708 KW, ensuring the high efficiency of regeneration. The equipment can not only use the common upper cutting milling process, but also use the lower cutting process developed by Wittgen for regeneration construction. When equipped with a conveyor belt, the mixture obtained by the down cutting milling process is transported to the asphalt paver running behind it, and then evenly spread in a timely manner.

設備優勢

Equipment advantages

再生寬度為 3.8 m 寬時可 100 % 再生 15 cm 厚的瀝青混凝土層

When the regeneration width is 3.8 m, a 15 cm thick asphalt concrete layer can be 100% regenerated

以整個工作寬度一次性無縫再生一個車道，施工效率極高

Seamless regeneration of one lane at a time across the entire working width, with extremely high construction efficiency

與之匹配的攤鋪機具有很大的材料輸送能力，故原路面材料的不均勻性得以，并可鋪筑出良好的橫斷面

The matching paver has a great material conveying capacity, so the unevenness of the original pavement material can be eliminated and a good cross-section can be paved

下切施工作業大大優化材料的級配

The downward cutting construction operation greatly optimizes the grading of materials

雙重功能：即能夠當作后出料再生機，又可以作為高性能銑刨機進行使用

Dual function: It can be used as both a post discharge regeneration machine and a high-performance milling machine

本文由 冷再生機租賃 友情奉獻.更多有關的知識請點擊   http://www.wlc189.com  真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from Cold Recycling Machine Rental For more related knowledge, please click http://www.wlc189.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.