路面冷再生機將銑刨料所有開展再次運用，加上其經濟發展的處理方法，促使選用泡沫塑料瀝青開展冷再生工程施工變成一種開拓性解決方法，做到環境保護而經濟發展的功效。下面冷再生機出租廠家為您講解路面冷再生機構成以及其工作原理。

The pavement cold recycling machine will reuse all milling materials, and its treatment method of economic development will promote the use of foamed plastic asphalt for cold recycling engineering construction to become a pioneering solution to achieve the effect of environmental protection and economic development. Below, the rental manufacturer of the cold recycling machine will explain to you the composition of the road cold recycling mechanism and its working principle.

路面冷再生機構成：

Composition of road surface cold regeneration machine:

路面冷再生機是瀝青路面冷再生施工現場的關鍵機器設備，一般由動力裝置、傳動裝置、工作中設備、噴灑系統軟件和控制自動控制系統構成。

The road surface cold recycling machine is a key machine equipment in the construction site of asphalt road surface cold recycling, generally composed of power device, transmission device, working equipment, spraying system software, and automatic control system.

路面冷再生機工作原理：

Working principle of road surface cold regeneration machine:

路面冷再生機往前行駛時，電機轉子往上轉動銑刨原路面原材料，另外，水根據塑料軟管從路面冷再生機聯接的灑水車中運輸回來，并在路面冷再生機的拌和倉中噴灑。

When the road surface cold regeneration machine moves forward, the motor rotor rotates upwards to mill and plane the raw materials of the original road surface. In addition, water is transported back from the sprinkler connected to the road surface cold regeneration machine through plastic hoses and sprayed in the mixing bin of the road surface cold regeneration machine.

水的供氣量根據微控制器操縱的水下混凝土系統軟件準確操縱，以做到水分含量。銑刨電機轉子將水與銑刨料充足拌和。液體增稠劑，比如熱瀝青(冷再生機內置泡沫塑料瀝青聚氨酯發泡設備，可將熱瀝青加溫到160-180°C，與小量水混和聚氨酯發泡)可根據設計方案的噴灑嘴被噴灑到拌和腔；

The water supply volume is accurately controlled by the underwater concrete system software controlled by a microcontroller to achieve moisture content. The rotor of the milling motor thoroughly mixes water with the milling material. Liquid thickeners, such as hot asphalt (the cold recycling machine is equipped with foam plastic asphalt polyurethane foaming equipment, which can heat the hot asphalt to 160-180 ° C and mix it with a small amount of water for polyurethane foaming) can be sprayed to the mixing chamber through the spray nozzle according to the professional design scheme;

粉末狀增稠劑如混凝土需按設計方案加上量事前透層在路面冷再生機前的路面上，路面冷再生機將粉末狀增稠劑與再生顆粒和水一次性拌和。如遇再造層原配合比欠佳的狀況，可在再死前將所缺乏的一部分瀝青混合料透層在路面上，根據與廢料加工拌和來改進原路面原材料的配合比。

Powder thickener, such as concrete, needs to be pre coated according to the design plan on the road surface in front of the cold recycling machine. The cold recycling machine mixes the powder thickener with recycled particles and water in one go. If the original mix ratio of the reconstructed layer is not good, the missing part of the asphalt mixture can be thoroughly coated on the road surface before it dies again, and the mix ratio of the original road surface raw materials can be improved by processing and mixing with waste materials.

路面冷再生機構成以及其工作原理相關事項就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://www.wlc189.com咨詢！

That's all for the explanation of the composition and working principle of the road surface cold regeneration mechanism. We hope it can provide you with good help. For more information, please come to our website http://www.wlc189.com consulting service