冷再生機施工前的準備工作主要包括人員準備、機械準備、材料準備、交通協調及后勤保障。下面冷再生機出租廠家就從這幾個方面來為您講解下相關內容吧。

The preparation before construction of the cold regeneration machine mainly includes personnel preparation, mechanical preparation, material preparation, traffic coordination and logistics support. The following cold regeneration machine rental manufacturers will explain the relevant content to you from these aspects.

（1）材料要求：水泥選用強度等級為32.5、初凝時間≥3h、終凝時間≤10h且≥6h硅酸鹽或普通硅酸鹽水泥。水泥應具有良好的工作性、低水化、高后期強度、耐久性、耐腐蝕性和抗裂性能。

(1) Material requirements: Portland or ordinary Portland cement with strength grade of 32.5, initial setting time ≥ 3h, final setting time ≤ 10h and ≥ 6h shall be selected. Cement shall have good workability, low hydration, high late strength, durability, corrosion resistance and crack resistance.

（2）機械要求：工程施工過程通過再生機組來完成，再生機組包括：冷再生主機、水泥稀漿車、平地機、壓路機等。

(2) Mechanical requirements: the project construction process is completed through the regeneration unit, which includes: cold regeneration host, cement slurry truck, grader, roller, etc.

（3）人員要求：工程技術人員及機械操作人員應經過冷再生培訓并經過考核合格后方可上崗。

(3) Personnel requirements: engineering technicians and mechanical operators shall receive cold regeneration training and pass the examination before taking up their posts.

（4）工程協調：作好施工總體計劃，采取不中斷交通半幅施工，作好施工期間交通疏導工作，準備施工作業面的遮擋。

(4) Project coordination: make the overall construction plan, take the half width construction without interrupting the traffic, do a good job of traffic dredging during the construction, and prepare for the shelter of the construction working face.

此外要知道，冷再生機施工后，等路面強度達到要求后，用空壓機吹凈浮灰，撒布透層油后，上面灑石屑，之后開放交通。更多相關事宜就來我們網站http://www.wlc189.com進行咨詢！

In addition, after the construction of the cold recycling machine, after the pavement strength meets the requirements, use the air compressor to blow the dust, spread the priming oil, sprinkle stone chips on it, and then open the traffic. Come to our website for more related matters http://www.wlc189.com Consult!